BTCWN - DURABOND 210 JOINT COMPOUND (NON-ASBESTOS)
- MSDS: BTCWN
- Manufacturer: UNITED STATES GYPSUM COMPANY
- Product Name: DURABOND 210 JOINT COMPOUND (NON-ASBESTOS)
- National Stock Number: 5640-00F032756
Product Identification
Product ID:DURABOND 210 JOINT COMPOUND (NON-ASBESTOS)
MSDS Date:05/15/1986
FSC:5640
NIIN:00F032756
MSDS Number: BTCWN
Responsible Party
CHICAGO, IL 60606-4678
US
Emergency Phone: 312-321-4383/312-606-4542
Info Phone: 312-321-4383
Cage: 61357
Contractor
Telephone: 312-606-4000 (EMERG /4542)
Cage: 61357
Ingredients
SILICA, MICA, MUSCOVITE
CAS: 12001-26-2
RTECS: VV8760000
Fraction By Weight: 0-22%
ACGIH TLV: 3 MG/CUM
ATTAPULGITE CLAY, HYDROUS MAGNESIUM ALUMINUM SILICATE
CAS: 12174-11-7
RTECS: RT6400000
Fraction By Weight: 1.5-8%
STARCH; VANCIDE MZ-96
CAS: 9005-25-8
RTECS: GM5090000
Fraction By Weight: 0-0.10%
ACGIH TLV: 10 MG/CUM TOTAL DUST
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:PLASTER MAY DEVELOP SUFFICIENT HEAT TO
CAUSE BURNS IF A LARGE MASS, SUCH AS A CAST OF HAND OR ARM IS KEPT
IN CONTACT W/SKIN WHILE HARDENING.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: MICA DUST OVER A PERIOD OF YEARS
MAY CAUSE PNEUMOCONIOSIS (MICOSIS).
First Aid
First Aid:EYES: FLUSH W/WATER FOR 15 MINS. SKIN: WASH W/SOAP & WATER.
INHALATION: REMOVE TO FRESH AIR. INGESTION: PLASTER HARDENS WHEN
WETTED & MAY RESULT IN OBSTRUCTION. OBTAIN MEDICAL ATTENTION IN ALL
CASES.
Fire Fighting
Flash Point:NONE
Accidental Release
Spill Release Procedures:SWEEP UP, AVOID CREATING EXCESSIVE DUST. IF
WASHED DOWN, MAY PLUG DRAINS. IF ALREADY MIXED W/WATER, SCRAPE UP &
WASH DOWN RESIDUE.
Handling
Handling and Storage Precautions:KEEP DRY. DEW POINT CONDITIONS, OR
OTHER CONDITIONS, CAUSING PRESENCE OF LIQUID WILL HARDEN PRODUCT.
Exposure Controls
Respiratory Protection:USE NIOSH APPROVED RESPIRATOR FOR MICA SHOULD BE
USED IF ABOVE TLV
Ventilation:LOCAL EXHAUST TO KEEP BELOW TLV
Eye Protection:SAFETY GLASSES
Supplemental Safety and Health
HARDENING TIME: VARIES. CHECK USAGE &/OR PRODUCT SPECIFICATION DATA FOR
EACH PRODUCT.
Chemical Properties
Spec Gravity:2.5-2.6
Solubility in Water:SLIGHT
Appearance and Odor:OFF-WHITE TO GRAY POWDER W/LOW ODOR
Stability
Stability Indicator/Materials to Avoid:YES
Disposal
Waste Disposal Methods:SANITARY LANDFILL IN ACCORDANCE W/FEDERAL, STATE
& LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.